Accessories

? Compare our cutter machines here! WHAT DO YOU NEED TO CUT?

WHAT DO YOU NEED TO CUT?

	Verdi BASIC	Verdi TWIN		Wincut	Inblade	Inblade PRO	Inbest BASIC	Inbest TWIN	Inbest PRO
Download table
CUTTING SYSTEM	SAW	SAW	BLADE	INTERCHAN. HEADS	INTERCHANGEABLE HEADS		INTERCHANGEABLE HEADS
RIGIDS
PVC Foamboard	20 mm	20 mm	5 mm	5 mm	13 mm		5 mm / 10 mm**		10 mm
Dibond®	12 mm	12 mm	-	-	4 mm		-	-	-
ChromaLuxe®	3 mm	3 mm	-	-	1 mm		-	-	-
Plexiglas®	12 mm	12 mm	-	-	*6 mm / ♦**	*6 mm / / ♦	*4 mm / ♦**	*4 mm / ♦**	*4 mm / ♦**
MDF / Wood	20 mm	20 mm	-	-	4 mm		-	-	-
Glass	-	-	*6 mm / ♦**	6 mm ♦	*6 mm / ♦**		-	-	-
SEMI-RIGIDS
Foamboard	-	-	20 mm	20 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Cardboard	-	-	20 mm	20 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Re-board®	-	20 mm		13 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Corrugated plastic	20 mm	20 mm	5 mm	5 mm	13 mm		13 mm	13 mm	13 mm
Passepartout	-	-	Yes	Yes	Yes		Yes	Yes	Yes
FLEXIBLES
Fabric / Textiles	-			-	-		Yes	Yes	Yes
Plastic film	-			-	-		Yes	Yes	Yes
Banner materials	-			-	-		Yes	Yes	Yes
Paper	-			-	-		Yes	Yes	Yes
Vinyl	-			-	-		Yes	Yes	Yes
Magnetic sheets	-			-	-		Yes	Yes	Yes
V-GROOVE
Dibond®	-			-	4 mm*		-	-	-
Re-board®	-			-	20 mm*		-	-	-
Foamboard	-			-	13 mm*		-	-	-
MÁX. CUT
All materials	305 cm high			305 cm high	250 cm high	305 cm high	320 cm wide	320 cm wide	320 cm wide
Optional accessory required. *Possible but not for daily use ♦ Score and snap.

Code 45 19 90 CIRCULAR BLADE CUTTING HEAD (Included)

Cutting head with circular blade for the Inblade and Inblade Pro. Suitable for cutting aluminium composites / Dibond® or MDF up to 4 mm thick and aluminium / CromaLuxe® foils up to 1 mm thick.

Code 45 19 91 SINGLE BLADE CUTTING HEAD (Included)

Cutting head with blade for the Inblade and Inblade Pro. Suitable for cutting semi-rigid materials such as foam board, cardboard, honeycomb / Re-board® and also PVC up to 13 mm thick. The depth of the blade can be adjusted with this head. The head is supplied with 5 replacement blades.

Code 45 18 96 ACRYLIC CUTTING HEAD

Cutting head with blade for the Inblade and Inblade Pro. Suitable for cutting acrylics / Plexiglas® up to 6 mm thick.

Code 45 18 97 TRIPLE BLADE CUTTING HEAD

Cutting head with 3 blades for the Inblade and Inblade Pro. Suitable for cutting semi-rigid materials such as foam board, cardboard, or honeycomb / Re-board® up to 20 mm thick.

Code 45 18 98 V-GROOVE CUTTING HEAD

Cutting head with V-groove blade for the Inblade and Inblade Pro. Suitable for cutting aluminium composite / Dibond® up to 5 mm thick.

Code 45 18 99 GLASS CUTTING HEAD

Cutting head with wheel for the Inblade and Inblade Pro. Suitable for cutting glass up to 6 mm thick and a maximum height of 165 cm. It incorporates an accessory to facilitate the partitioning of the glass.

Code 45 19 04 V-GROOVE SEMI RIGID MATERIALS CUTTING HEADS SUPPORT

Accessory necessary to attach to the Inblade and Inblade Pro the V-groove cutting heads for honeycomb / Re-board® 45 19 85 and foam board 45 19 86.

Code 45 19 85 RE-BOARD V-GROOVE CUTTING HEAD

Cutting head with 2 blades for Inblade and Inblade Pro. Suitable for cutting V-groove honeycomb / Re-board® up to 20 mm thick. Also requires accessory 45 19 04.

Code 45 19 86 FOAMBOARD V-GROOVE CUTTING HEAD

Cutting head with 2 blades for Inblade and Inblade Pro. Suitable for cutting V-groove foamboard up to 13 mm thick. Also requires accessory 45 19 04.

Code 14 20 08 ARM EXTENSION FOR INBLADE WITH MILLIMETRIC SCALE -1 m-

1 metre extension that fits into the side of the Inblade and Inblade Pro to work with large sheets. This will make the work much easier. It can be mounted either on the right or left side of the machine.

Code 45 19 94 MEASURE TAB, RIGHT -Included-

Measuring stops are used to increase the accuracy and speed of repetitive cutting by simply adjusting the stop to the desired measurement. Included in: Inblade and Inblade Pro.

Code 45 19 93 MEASURE TAB, LEFT -Included-

Measuring stops are used to increase the accuracy and speed of repetitive cutting by simply adjusting the stop to the desired measurement. Included in: Inblade and Inblade Pro.

Code 45 06 51 LASER BEAM

This mini laser is mounted on the cutting heads of the Inblade and Inblade Pro cutters. It shows a thin red line on the material that serves as a guide for the cut.

Code 45 18 01 FREE STANDING INBLADE, 165

With this special support, the Inblade can be held upright without the need to stand on the wall.

Code 45 18 02 FREE STANDING INBLADE, 210

Code 45 19 13 FREE STANDING INBLADE, 250

Code 45 19 14 FREE STANDING INBLADE, 305

Code 02 09 44 NUAIR SILENT COMPRESSOR, 1 HP -6 litres-

Oil-free piston compressor, lightweight, practical and quiet, ideal for all those applications that require silence and ease of transport. Suction cup feet, which ensure optimum stability. Head unit with low speed motor, extremely silent: 66dB(A). Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Inblade.
• Verdi Basic (only when purchasing the pneumatic presser).
• Verdi Twin (for sizes 122 and 157 cm).

Code 02 09 38 SILENT COMPRESSOR, 0.5 Hp -9 l-

With sound levels from just 40 dB and almost no vibration when running. Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Inblade.
• Verdi Basic (only when purchasing the pneumatic presser).
• Verdi Twin (for sizes 122 and 157 cm).

Code 02 09 40 SILENT COMPRESSOR, 1 Hp -24 l-

With sound levels from just 42 dB and almost no vibration when running. Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only when purchasing the pneumatic presser).
• Verdi Twin.

Code 02 09 24 ABAC OS20P POLE POSITION COMPRESSOR, 2 Hp 220 V -24 l-

High performance with a quiet, oil-free pump. Easy to transport and position. Noise level as low as 59 dB(A). Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only if you purchase the pneumatic foot).
• Verdi Twin.

Code 02 09 26 ABAC L20 POLE POSITION COMPRESSOR, 2 Hp 220 V -24 l-

Lubricated compressor with direct drive. Excellent technology and simple operation. Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only if you purchase the pneumatic foot).
• Verdi Twin.

Blades