En 
Es 
Fr 
De 
WHAT DO YOU NEED TO CUT?
| Verdi BASIC | Verdi TWIN | Wincut | Inblade | Inblade PRO | Inbest BASIC | Inbest TWIN | Inbest PRO | ||
|---|---|---|---|---|---|---|---|---|---|
| Download table |  |
 |
 |
 |
 |
 |
 |
 |
|
| CUTTING SYSTEM | SAW | SAW | BLADE | INTERCHAN. HEADS | INTERCHANGEABLE HEADS | INTERCHANGEABLE HEADS | |||
| RIGIDS | |||||||||
| PVC Foamboard | 20 mm | 20 mm | 5 mm | 5 mm | 13 mm | 5 mm / 10 mm** | 10 mm | ||
| Dibond® | 12 mm | 12 mm | - | - | 4 mm | - | - | - | |
| ChromaLuxe® | 3 mm | 3 mm | - | - | 1 mm | - | - | - | |
| Plexiglas® | 12 mm | 12 mm | - | - | 6 mm* / ♦ | 6 mm* / **/ ♦ | 4 mm* / ♦ | 4 mm* / ♦ | 4 mm* / ♦ |
| MDF / Wood | 20 mm | 20 mm | - | - | 4 mm | - | - | - | |
| Glass | - | - | 6 mm* / ♦ | 6 mm ♦ | 6 mm* / ♦ | - | - | - | |
| SEMI-RIGIDS | |||||||||
| Foamboard | - | - | 20 mm | 20 mm | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | |
| Cardboard | - | - | 20 mm | 20 mm | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | |
| Re-board® | - | 20 mm | 13 mm | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | 13 mm / 20 mm* | ||
| Corrugated plastic | 20 mm | 20 mm | 5 mm | 5 mm | 13 mm | 13 mm | 13 mm | 13 mm | |
| Passepartout | - | - | Yes | Yes | Yes | Yes | Yes | Yes | |
| FLEXIBLES | |||||||||
| Fabric / Textiles | - | - | - | Yes | Yes | Yes | |||
| Plastic film | - | - | - | Yes | Yes | Yes | |||
| Banner materials | - | - | - | Yes | Yes | Yes | |||
| Paper | - | - | - | Yes | Yes | Yes | |||
| Vinyl | - | - | - | Yes | Yes | Yes | |||
| Magnetic sheets | - | - | - | Yes | Yes | Yes | |||
| V-GROOVE | |||||||||
| Dibond® | - | - | 4 mm* | - | - | - | |||
| Re-board® | - | - | 20 mm* | - | - | - | |||
| Foamboard | - | - | 13 mm* | - | - | - | |||
| MÁX. CUT | |||||||||
| All materials | 305 cm high | 305 cm high | 250 cm high | 305 cm high | 320 cm wide | 320 cm wide | 320 cm wide | ||
|
*Optional accessory required. **Possible but not for daily use ♦ Score and snap. |
|||||||||
INBLADE Vertical Cutter
Which machine do I need for my workshop?
We have a cutting capacity comparator that can help you select the most suitable machine. You can check it out at the following link.
What is the difference between the InBlade model and the InBlade Pro model?
In the InBlade model, the cutting head movement is manual, while in the InBlade PRO model it is pneumatic. Both models have a pneumatic clamp for precise material clamping.
Do the InBlade and InBlade Pro require compressed air to operate?
Yes, both models require compressed air to operate the pneumatic clamp. In addition, the InBlade PRO model requires compressed air for the cutting head.
What is the recommended compressed air pressure?
A pressure of 6 to 7 bar is required for proper operation.
Where can the InBlade or InBlade Pro be installed?
They can be installed on the wall to take up as little space as possible, or with the stand brackets available as an accessory.
How high do I need to install the machine in an upright position?
You should bear in mind that each machine needs more space than it actually takes up for its cutting capacity. The required dimension of each machine is indicated in the technical information.
Is it easy to change the cutting heads on the InBlade range?
Yes, it is very easy to change cutting heads.
Can the InBlade cut acrylic?
With the "acrylic cutting head" accessory (ref. 451896), it is possible to cut acrylic by marking and splitting.
What maintenance do I need to do on the machines?
You only need to apply lubricant spray once a year on the sliding guides.
How do I know which accessories are included and which are not included in the machine I want to buy?
In the brochures and on the website, we indicate which accessories are included and which are optional for each model. You can also consult the "Accessories" section in the presentation of each machine on our website.